Telecab Residential Elevator

Savaria offers the Telecab, a residential two stop elevator. The telecab maximizes living space and keeps construction to a minimum by eliminating the need for a hoistway.

The Telecab's modern design suits your environment. It is an economical, attractive and dependable solution, allowing mobility impaired people to move from one floor to another.

Smoke Glass

Clear Glass

Product Specifications:

500 lbs (227 kg) capacity

Maximum travel of 16’(4,877 mm)

Travel speed 25 feet/min (0,07 m/s) approx.

Cab dimensions: 30" x 46" x 78" (762 x 1,168 x 1,981 mm)

115 VAC relay logic operation (115 VAC up direction and 12 VDC down)

Automatic battery recharging system (115 VAC)

Low voltage controls

2:1 chain hydraulic drive system

Roller guide shoes

Keyed call / send stations

Continuous pressure directional push buttons

Non-skid platform surface

Beige or white acrylic urethane paint finish

¼" (6 mm) plexiglass windows

Front only car access

34" x 59" (864 x 1,499 mm) minimum floor cutout

90" (2,286 mm) minimum overhead at top landing

Three pieces modular cab design and 8 ft modular guide rail for easy access on site

Time delay for automatic door lock system

Comforms to ASME A18.1 and CSA-B613

Safety Features

Adjustable top floor presence detector built into the cab

Electro-mechanical door lock and open door sensor

Under panel safety sensor

Emergency stop and alarm

Emergency battery lowering

Emergency lowering

Fully enclosed drive tower for safety and aesthetics

Pressure relief valve to prevent platform overload

Slack chain safety device

Telephone in cab

Halogen light in cab

Optional equipment available

Battery operation in up and down direction

32" x 54" (813 x 1,372 mm) cab dimension

Front / back access

Two door concept

Custom cab dimension

Custom color

Door closer

Remote hand control

Door mount or side mount car control station