Vertical Indoor or Outdoor

The V-1504 vertical wheel chair platform lift, the most versatile lift on the market. For the first time in the industry it is possible to actually equip the same drive system with several different platform configurations.

The unique drive and platform combinations of the V-1504 vertical wheel chair platform lift allows for rapid delivery and ease of installation in respect to any architectural requirements.

Due to its versatile design, the V-1504 vertical wheel chair platform lift can be installed indoors or outdoors in both residential or public buildings.

Standard equipment available on all V-1504 vertical wheel chair platform lifts:

750 lbs (340 kg) capacity

Maximum travel of 23' (7,000 mm)*

Travel speed: 25 feet/min (0.13 m/s) approx.

34" x 54" (864 x 1,372 mm) minimum platform dimensions

12 VDC battery operation

Emergency battery lowering

Remote location emergency manual lowering valve

2:1 chain hydraulic drive system

Gear type hydraulic pump

8 foot long modular guide rail assembly

Roller guide shoes

1.5 hp (1,119kW) output

Electronic free relay logic controller

Automatic battery recharching system (115 VAC)

Combination mechanical lock and electric contacts or electric strike*

Low voltage controls

Normal limit switch

Control buttons on platform*

Keyed call station

Continuous pressure directional buttons

42" (1,067 mm) high side guard panels

Non-skid platform surface

Beige acrylic urethane paint on all steel surfaces

No machine room required

Optional equipmentavailable:

Special platform dimensions up to 18 ft2 (1.67 m2)*

Enter/exit same side

90º exit

Intermediate stops

Platform gate

Top landing gate

115 VAC operation (115 VAC up direction and 12 VDC battery down)

Upper/lower landing door 80" (2,032 mm)

Flush mounted 80" (2,032 mm) door and frame, 1H1/2 ULC fire-rated

Portable unit package

Stair bridge

Flip up seat

Custom color

Public building package conforms to CSA-B355 and ASME A18.1*

Emergency light and alarm

Direct hydraulic drive system

Outdoor package including electro-deposited yellow zinc coating

Motorized door

* Consult local codes and regulations

V1504-STD	The standard model is built around a powerful hydraulic system which can raise a platform and the users throughout various architectural boundaries. It is designed to fit indoor hoistway applications and also for outdoor use.
V1504-TL	The tall enclosure model is designed to provide an enclosure with metal inserts from the bottom landing door to the top landing gate. It is a good alternative to a three gate system because of it's simplicity and ease of operation.
V1504-PE V1504-ALPE	The plexiglass enclosure model is designed to provide an aesthetic enclosure with plexiglass inserts. It is available with various travels and is offered with top landing gate for semi-enclosed hoistway or with top landing door, enclosure extension and plexiglass dome for both indoor and outdoor applications. The ALPE model is made of an aluminum enclosure and a yellow zinc treatment on steel parts to withstand the outdoor environment.
V1504-LUX	The luxury model has been created to meet those very personalized architectural needs. It is a rich blend of tempered glass, stainless steel or brass materials. It is designed with a bottom landing door and top landing gate or door.
V1504-MOB	The mobile model is a lift that can be rolled inside a building to any low rise barrier in order to become wheelchair accessible. It easily stores out of sight when not in use