Savaria Incline Platform Lift ES-125 Toronto GTA York Region Vancouver BC

Savaria offers the ES-125, the ideal solution for the obstacle of a straight run staircase. The ES-125P and ES-125 Plus with top landing drive cabinets are designed to be installed in public buildings such as: Schools, churches, municipal buildings, nursing homes, restaurants, community centres, etc. It can be installed indoor as well as outdoor and it can be custom-built to satisfy all types of architectural requirements. They meet or exceed the CSA-B355 and ASME A18.1

standards regarding elevating devices for the handicapped. The ES-125 model is designed for residential use. It's compact folding platform leaves the stairway virtually unobstructed when not in use.

Available With Battery Back-up Operation

Stair Platform Lift - Model ES-125 - General specifications

Platform Dimensions	Type I: 27.50" x 36" (700 x 914 mm) - Type II: 28.50" x 44" (724 x 1,118mm) Type III: 30" x 48" (762 x 1,219 mm) - Type IV: 30" x 44" (762 x 1,118 mm) All platforms have non-skid surfaces. The platform ca be folded manually or with the help of an optional power-fold platform. Once folded the unit uses very little space in order to leave the staircase unobstructed.
Access ramps	Two positive action automatic access ramps for straight or 90° entry
Motor assembly	110 VAC, ½ hp (373 W), 1,750 rpm / gear reducer: 50:1
Type of drive unit	Standard system: Aircraft cable 3/16" (5 mm) with breaking load of 4,200 lbs (1,950 kg), deviator pulley and winding drum in a machine room. Plus system: Roller chain #50 and aircraft cable with breaking load of 6,100 lbs (2,767 kg). The electruc motor gear reducer and controller are self enclosed at the top landing in a drive cabinet. No machine room required.
Controller	Meets CSA and ETL standards - 24 VAC operating controls
Power Supply	110 VAC, 1Ph, 60Hz, 15 amp
Rated speed	14.0 ft / min. (0.071 m / s) (approx.)
Capacity	One person in a wheelchair
Rated load	450 lbs (240 kg)
Operating controls*	Continuous pressure directional buttons are installed on the platform with a key switch for increased safety. (*)
Call stations	Continuous pressure directional buttons are installed at each landing.
Finish	One coat of primer and two coats of beige acrylic urethane paint in all steel surfaces.
Safety features	Automatic dual access ramps, mechanical emergency brake in case of drive system failure, slack cable switch, keyed continuous pressure controls and upper / lower limit switches are standard features on this unit.

*Subject to change according to local regulations in effect

Available options

3-position safety arms

Fold-down seats with safety belt

Powered fold platform

Touch sensitive plate on the access ramps and under the platform to stop the lift if and obstruction is encountered

12 volt battery operation

Hand-help pendant control on the platform

Split rail

Drive cabinet at top landing

Audio visual alarm

Motor with electromechanical brake

Emergency stop switch

special color

Outdoor package

Self-support posts

Flush cabinet at front or back of rail (Plus system)